ριиg σr ρσиg ?

[Zedoune]

Ah le con, je viens de réinstaller Windows 7, j'ai pas fait gaffe....
Bon, je suis bon pour faire une installation de Vista

ping

DV7 !

[Zedoune]

Merci ...

ping

[dricfr]

pong > Peut-être que le PC a pris un mauvais coup de jus. DD qui a pris, le transfo mourant etc... + tout ce qui va s'en suivre ^^ ! Espérons-lui que non !

@++

[Zedoune]

ping

C'est pas le mien, m'en fou un peu mais ça me ferait chier pour lui si tout commence à déconner :/

[kalistyan]

Pong FiFa 2010 :d

Milan (moi) vs Manchester (frèro)

[kalistyan]

Ping victoire

4 - 0

[Zedoune]

pong

C'est vraiment chiant à installer Vista par rapport à Seven ...

[Kronick]

ping zplay boulet

[Zedoune]

Pong, commande inversée de mes deux

[kalistyan]

Ping Apéro

[Zedoune]

ping !

[Zedoune]

ping du matin, tête dans le cul

[Kronick]

pong pareil, avec pleins de poils de chat à balayer grrrr

[Zedoune]

Saloperie de chat

A part fumer des pétards et jouer au babyfoot, ça fait rien du tout

ping

[micha30000]

pong faut tous les bruler

[poulpito]

ping ou s'en servir comme moufles !!!

[levend]

pong faut tous les bruler

Comme combustible, ça ne vaut rien

pong

[poulpito]

ping

[Zedoune]

pong

[kalistyan]

Ping café

[gizmo78]

y a une commande pour voire l'état d'un disque sous debian?

pong

[Zedoune]

smartctl qui fait partie du paquet smartmontools

ping

[gizmo78]

okay c'est installé, quand je fais smartctl /dev/hda j'ai ca:

Tux:/home/gizmo15# smartctl /dev/hda -a
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family: Maxtor Fireball 3 family
Device Model: Maxtor 2F020J0
Serial Number: F11W9R7E
Firmware Version: VAM51JJ0
User Capacity: 20 847 697 920 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Sun Apr 18 19:04:39 2010 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (1261) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 21) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
3 Spin_Up_Time 0x0027 233 226 063 Pre-fail Always - 4680
4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 256
5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always - 0
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0
7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0
8 Seek_Time_Performance 0x0027 250 237 187 Pre-fail Always - 35000
9 Power_On_Minutes 0x0032 238 238 000 Old_age Always - 996h+10m
10 Spin_Retry_Count 0x002b 253 242 157 Pre-fail Always - 0
11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 250 250 000 Old_age Always - 1507
192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 210
193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 595
194 Temperature_Celsius 0x0032 253 253 000 Old_age Always - 30
195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 24233
196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0
197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 0
198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age Offline - 0
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 0
202 TA_Increase_Count 0x000a 253 252 000 Old_age Always - 0
203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 0
204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age Always - 0
205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age Always - 0
207 Spin_High_Current 0x002a 253 248 000 Old_age Always - 0
208 Spin_Buzz 0x002a 253 250 000 Old_age Always - 0
209 Offline_Seek_Performnce 0x0024 164 164 000 Old_age Offline - 0
99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0

SMART Error Log Version: 1
ATA Error Count: 1
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 50 40 97 03 00 Error: ABRT

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ef fe 00 00 00 00 00 00 00:02:15.936 SET FEATURES [Reserved for CFA]
ec 00 01 01 00 00 00 00 00:02:15.920 IDENTIFY DEVICE
c3 e4 00 00 00 00 00 00 00:02:15.904 [VENDOR SPECIFIC]
ef 42 c0 00 00 00 00 00 00:02:15.888 SET FEATURES [Enable AAM]
c3 3d 00 00 00 00 00 00 00:02:15.872 [VENDOR SPECIFIC]

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

j'ai ca comme info mais je sais pas trop quoi chercher dedans pour voir l'état du disque :/

pong

[Zedoune]

la partie intéressante c'est celle avec les colonnes

d'ailleurs, avec smartctl -A /dev/sda

tu dois avoir que les infos intéressantes

ping

[gizmo78]

merci

et quand tout est en OldAge et Pre-fail spa très bon nan?

pong