ριиg σr ρσиg ? Côté obscur
Publié : mar. 3 oct. 2017 14:33
je sais pas s'il y a beaucoup de métiers dans ce côté là niveau hardware... :/
pour le réseau, y a admin réseau
pong
pour le réseau, y a admin réseau

pong
ping : ca veut dire quoi?J'ai envie de me pendre en lisant certains mails d'utilisateurs ...
Objet : RE: problème étiquette
Description :
Bonjour,
Il va falloir avec mon service informatique qui nous lit et ce afin d’afin de leur d’écrire ce qui ne remontent pas chez vous.
Cordialement,
pong...
+1
Super produit, et pourtant j'utilise la version gratuite !
ping
J'avais l'ISO à dispo, y a juste fallut trouver une clé USB.
Par contre, le mappage auto n'a pas fonctionné, j'ai dû assister la personne au téléphone.
Je ne fais que rapporter l'analyse d'un technicien, mais elle semble cohérente.
En effet, l'attaque s'est produite samedi vers 16h. La société étant fermée, cela exclu le coup de la pièce jointe (et pas de messagerie sur le TSE).
De mon côté, j'ai trouvé des choses étranges, dont ceci :
Code : Tout sélectionner
Trojan.Agent.E.Generic, C:\TMP\SVCHOST.EXE
Qui donc ?
pong, non. L'interet ?
Bon sinon la blague, je me connecte à distance sur le PC de ma fille et v'la la rigolade :
Win10 ...
visiblement bien que son compte d'administration ait encore les droits d'éxécution sur mmc.exe, ça bloque
pareil avec mon compte d'admin ...
maj foireuse ou virus ?
Nan mais fo avoir vue la.serie en vrai, envf et en vo pour comparerpong
@Biour : l'apéro doit être sévère car moi au bout de 3 sky ça ne me fait pas rire
@Levend : mode réparation au boot + restauration point de sauvegarde ?
ça ne fonctionne pas, ce n'est pas trop grave, j'ai remplacé le DD et installé W7, j'y ai gagné en perfpong
@Biour : l'apéro doit être sévère car moi au bout de 3 sky ça ne me fait pas rire
@Levend : mode réparation au boot + restauration point de sauvegarde ?
Code : Tout sélectionner
Meraki Atheros LinuxLoader MR18 built Jan 31 2014 15:53:22
qca955x_init_ddr ok
test_memory ok
D-cache size: 64K
I-cache size: 32K
init_dram_uncached ok
init_icache ok
init_dcache ok
enable_caches ok
test_memory ok
nand_flash_init ok
loading fw at 256
hdr: [0x8e73ed8a : 0x400 : 0x459dec ]
part1: Copying image to memory ... ..................................
done.
part1: Checking sha1 (from 0x80060000 length 4562412) ... match
part1: sha1 calculated: f38d05c225d5b5cadc60bed75203eaa11a09c403
[ 0.000000] Linux version 4.4.61 (andrew@Shogun) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3389+4-379155d) ) #0 Fri May 19 16:57:48 2017
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
[ 0.000000] SoC: Qualcomm Atheros QCA9558 ver 1 rev 0
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] No valid device tree found, continuing without
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: board=MR18 mtdparts=ar934x-nfc:512k(nandloader)ro,8M(kernel),8M(recovery),113664k(ubi),128k@130944k(odm-caldata)ro console=ttyS0,115200 rootfstype=squashfs noinitrd
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 124824K/131072K available (3261K kernel code, 159K rwdata, 804K rodata, 248K init, 198K bss, 6248K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Clocks: CPU:720.000MHz, DDR:600.000MHz, AHB:200.000MHz, Ref:40.000MHz
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5309056796 ns
[ 0.000007] sched_clock: 32 bits at 360MHz, resolution 2ns, wraps every 5965232126ns
[ 0.008277] Calibrating delay loop... 358.80 BogoMIPS (lpj=1794048)
[ 0.071178] pid_max: default: 32768 minimum: 301
[ 0.076184] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.083229] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.092641] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.103141] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.110155] NET: Registered protocol family 16
[ 0.115996] MIPS: machine is Meraki MR18
[ 0.120221] SGMII cal value = 0xe
[ 0.355442] registering PCI controller with io_map_base unset
[ 0.361652] registering PCI controller with io_map_base unset
[ 0.375299] PCI host bridge to bus 0000:00
[ 0.379699] pci_bus 0000:00: root bus resource [mem 0x10000000-0x11ffffff]
[ 0.387006] pci_bus 0000:00: root bus resource [io 0x0000]
[ 0.392939] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.400161] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.409005] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit]
[ 0.416794] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref]
[ 0.424592] PCI host bridge to bus 0000:01
[ 0.428951] pci_bus 0000:01: root bus resource [mem 0x12000000-0x13ffffff]
[ 0.436285] pci_bus 0000:01: root bus resource [io 0x0001]
[ 0.442211] pci_bus 0000:01: root bus resource [??? 0x00000000 flags 0x0]
[ 0.449436] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
[ 0.458262] pci 0000:01:00.0: BAR 0: assigned [mem 0x12000000-0x1201ffff 64bit]
[ 0.466079] pci 0000:01:00.0: BAR 6: assigned [mem 0x12020000-0x1202ffff pref]
[ 0.473769] pci 0000:00:00.0: using irq 40 for pin 1
[ 0.479059] pci 0000:01:00.0: using irq 41 for pin 1
[ 0.484942] clocksource: Switched to clocksource MIPS
[ 0.491334] NET: Registered protocol family 2
[ 0.496602] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.504026] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.510826] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.517664] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.523884] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.530785] NET: Registered protocol family 1
[ 0.539294] Crashlog allocated RAM at address 0x3f00000
[ 0.555664] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.561871] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.574614] io scheduler noop registered
[ 0.578823] io scheduler deadline registered (default)
[ 0.584461] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.591564] console [ttyS0] disabled
[ 0.615434] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
[ 0.624608] console [ttyS0] enabled
[ 0.624608] console [ttyS0] enabled
[ 0.632027] bootconsole [early0] disabled
[ 0.632027] bootconsole [early0] disabled
[ 0.642878] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
[ 0.649362] nand: Hynix NAND 128MiB 3,3V 8-bit
[ 0.653870] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.664184] Scanning device for bad blocks
[ 0.730434] Bad eraseblock 701 at 0x0000057a0000
[ 0.763665] 5 cmdlinepart partitions found on MTD device ar934x-nfc
[ 0.770033] Creating 5 MTD partitions on "ar934x-nfc":
[ 0.775250] 0x000000000000-0x000000080000 : "nandloader"
[ 0.781749] 0x000000080000-0x000000880000 : "kernel"
[ 0.788082] 0x000000880000-0x000001080000 : "recovery"
[ 0.794519] 0x000001080000-0x000007f80000 : "ubi"
[ 0.800696] 0x000007fe0000-0x000008000000 : "odm-caldata"
[ 0.816197] libphy: ag71xx_mdio: probed
[ 1.485402] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:03 [uid=004dd072, driver=Atheros 8035 ethernet]
[ 1.496093] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
[ 1.504069] NET: Registered protocol family 10
[ 1.512462] NET: Registered protocol family 17
[ 1.517081] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 1.529979] 8021q: 802.1Q VLAN Support v1.8
[ 1.537404] UBI: auto-attach mtd3
[ 1.540606] ubi0: attaching mtd3
[ 2.156392] random: nonblocking pool is initialized
[ 2.927339] ubi0: scanning is finished
[ 2.947597] ubi0: attached mtd3 (name "ubi", size 111 MiB)
[ 2.953170] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
[ 2.960174] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[ 2.966976] ubi0: VID header offset: 512 (aligned 512), data offset: 2048
[ 2.973856] ubi0: good PEBs: 887, bad PEBs: 1, corrupted PEBs: 0
[ 2.979957] ubi0: user volume: 7, internal volumes: 1, max. volumes count: 128
[ 2.987286] ubi0: max/mean erase counter: 2065/1690, WL threshold: 4096, image sequence number: 0
[ 2.996288] ubi0: available PEBs: 472, total reserved PEBs: 415, PEBs reserved for bad PEB handling: 19
[ 3.006197] ubi0: background thread "ubi_bgt0d" started, PID 252
[ 3.012817] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
[ 3.020442] Please append a correct "root=" boot option; here are the available partitions:
[ 3.028925] 1f00 512 mtdblock0 (driver?)
[ 3.034052] 1f01 8192 mtdblock1 (driver?)
[ 3.039191] 1f02 8192 mtdblock2 (driver?)
[ 3.044321] 1f03 113664 mtdblock3 (driver?)
[ 3.049460] 1f04 128 mtdblock4 (driver?)
[ 3.054589] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[ 3.063779] Rebooting in 1 seconds..
__________________sri____________________
944x BootROM Ver. (asic) 1.0 [Nov 8 2011 13:42:57]
_________________________________________
find_hif: bootstrap = 0x31458
Nand Flash init
hdr: [0xbd000400 : 0xbd000400 : 0x6fb4 : 0xe5c86b84]
nand_load_fw: read 13 pages
nand_load_fw: 0x10000 0x800 0xbd000bf0
nand_load_fw: 0x20000 0x800 0xbd0013f0
nand_load_fw: 0x30000 0x800 0xbd001bf0
nand_load_fw: 0x40000 0x800 0xbd0023f0
nand_load_fw: 0x50000 0x800 0xbd002bf0
nand_load_fw: 0x60000 0x800 0xbd0033f0
nand_load_fw: 0x70000 0x800 0xbd003bf0
nand_load_fw: 0x80000 0x800 0xbd0043f0
nand_load_fw: 0x90000 0x800 0xbd004bf0
nand_load_fw: 0xa0000 0x800 0xbd0053f0
nand_load_fw: 0xb0000 0x800 0xbd005bf0
nand_load_fw: 0xc0000 0x800 0xbd0063f0
nand_load_fw: 0xd0000 0x800 0xbd006bf0
f/w 0 read complete, jumping to 0xbd000400
Meraki Atheros LinuxLoader MR18 built Jan 31 2014 15:53:22
qca955x_init_ddr ok
test_memory ok
D-cache size: 64K
I-cache size: 32K
init_dram_uncached ok
init_icache ok
init_dcache ok
enable_caches ok
test_memory ok
nand_flash_init ok