Page 1 sur 1
Boot Tyan s5383
Publié : sam. 27 sept. 2014 10:21
par manu7577
Hello,
Je suis en train de tester un CM Tyan S5383.
Je n'ai pas d'affichage, et sur la CM, j'ai l'affichage double digit qui indique "FF".
Savez vous ce que ca signifie ?
Boot Tyan s5383
Publié : sam. 27 sept. 2014 11:02
par TheMartel
Fully Fucked?
regarde dans le manuel non?
Boot Tyan s5383
Publié : sam. 27 sept. 2014 11:34
par manu7577
Peu-etre...
Le manuel ne dit rien.
L'indique que "FF" et l'autre "FF" puis d'autre chose et demarre.
Boot Tyan s5383
Publié : sam. 27 sept. 2014 12:00
par gizmo78
FF c'est pas un problème d'alim?
Boot Tyan s5383
Publié : sam. 27 sept. 2014 12:11
par manu7577
L'alim fonctionne avec ma Supermicro X6DAE-G2...
Ca pourrait venir de l'alim malgré tout ?
Boot Tyan s5383
Publié : sam. 27 sept. 2014 12:16
par gizmo78
c'est ce que j'ai eu sur une cm quadri opty et elle a jamais démarrée :/
as Tyan support replied: "A code of FF indicates that the board is not going through POST. This can be caused by defective processors, a defective power supply, a power supply that is not plugged into all the connections on the motherboard, or a defective or shorted motherboard."
They asked me try one processor at a time if the processor is faulty, and try different PSU. I tried one by one processor with 1,2 and 3 memory dimms but no change with same FF error. I tried different PSU, but same FF error. I replied them today.
I'll keep you up to date.
Thanks
http://www.techsupportforum.com/forums/ ... 08742.html
Boot Tyan s5383
Publié : sam. 27 sept. 2014 13:05
par TheMartel
si c'est mes cm que tu teste, fait gaffe il y en a une qui avait des condos pas beau a voir, va pas cramer une alim..
T'as bien branché tous les connecteurs d'alim de la cm?
Boot Tyan s5383
Publié : sam. 27 sept. 2014 13:49
par manu7577
Oui ce sont tes cm.
J'ai beau regardé, j'ai pas vu de condos bizarre.