Page 1 sur 1
[Résolu] ESXi 4.1 problème activation FTP
Publié : jeu. 1 août 2013 10:34
par kalistyan
Ayant tjrs une lenteur lors D'un Transfert de fichier vers un datastore local, je souhaitais activer le ftp.
Opération plutôt simple... Mais malheureusement cela ne fonctionne pas!
Code : Tout sélectionner
1) Enable SSH access to your host.
3) Copy proftpd to /sbin
4) Copy tcpd to /sbin
5) Copy proftpd.conf to /etc.
6) Add the below lines to /etc/inetd.conf.
# activate proftp daemon
ftp stream tcp nowait root /usr/sbin/proftpd proftpd
7) Determine the process id for inetd with the command ps | grep inetd
8) Restart inetd with this command kill -HUP
Code : Tout sélectionner
ftp xx.xx.xx.xx
Connected to xx.xx.xx.xx.
Connection closed by remote host.
Une idée ?
[Résolu] ESXi 4.1 problème activation FTP
Publié : jeu. 1 août 2013 10:48
par dsebire
regarde la config de ton serveur ftp

la c'est pas l'ESX qui chie, puisque t'arrive a te connecter, c'est le serveur FTP qui ferme la connexion !
[Résolu] ESXi 4.1 problème activation FTP
Publié : jeu. 1 août 2013 13:13
par kalistyan
J'ai testé différentes conf'... Mais rien n'y fait... :/
Ci-dessous conf' par défaut :
Code : Tout sélectionner
# This is a basic ProFTPD configuration file (rename it to
# 'proftpd.conf' for actual use. It establishes a single server
# and a single anonymous login. It assumes that you have a user/group
# "nobody" and "ftp" for normal operation and anon.
ServerName "Debian"
ServerType inetd
DeferWelcome off
ShowSymlinks on
MultilineRFC2228 on
DefaultServer on
ShowSymlinks on
AllowOverwrite on
RootLogin on
TimeoutNoTransfer 600
TimeoutStalled 600
TimeoutIdle 1200
#DisplayLogin welcome.msg
#DisplayFirstChdir .message
# Port 21 is the standard FTP port.
Port 21
# Umask 022 is a good standard umask to prevent new files and dirs
# (second parm) from being group and world writable.
Umask 022 022
# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 30
# Set the user and group that the server normally runs at.
User root
Group root
DelayEngine off
ScoreboardFile /var/run/proftpd_scoreboard
TraceLog /var/run/proftpd_trace
Trace DEFAULT:10
# Normally, we want files to be overwriteable.
AllowOverwrite on
# A basic anonymous configuration, no upload directories.
User ftp
Group nogroup
# We want clients to be able to login with "anonymous" as well as "ftp"
UserAlias anonymous ftp
RequireValidShell off
# Limit the maximum number of anonymous logins
MaxClients 10
# Limit WRITE everywhere in the anonymous chroot
DenyAll
# Uncomment this if you're brave.
DenyAll
AllowAll
[Résolu] ESXi 4.1 problème activation FTP
Publié : jeu. 1 août 2013 13:17
par gizmo78
t'as pas un soucis au début du vert? on dirait qu'il le prend comme un commentaire
[Résolu] ESXi 4.1 problème activation FTP
Publié : jeu. 1 août 2013 13:25
par yullito
[Résolu] ESXi 4.1 problème activation FTP
Publié : jeu. 1 août 2013 14:49
par dsebire
je vois pas le rapport, il est en FTP classique sans securité, pas d'echange de clef.
kali, t'as des choses dans les logs de l'esx ? genre authentication failure etc...
[Résolu] ESXi 4.1 problème activation FTP
Publié : jeu. 1 août 2013 15:51
par kalistyan
Logs :
Code : Tout sélectionner
Aug 1 13:35:10 proftpd[20529]: warning: unable to determine IP address of 'localhost.unnati.lan']
MAJ de mon DNS et rulez.
Merci dsebire.
[Résolu] ESXi 4.1 problème activation FTP
Publié : jeu. 1 août 2013 15:59
par dsebire
de rien
