Avis sur vieille guimbarde

Envie de tchacher, n'hésitez pas !
Quentj
Messages : 204
Inscription : ven. 12 janv. 2018 17:44

Avis sur vieille guimbarde

Message par Quentj »

Salut

J'ai moyen de récupérer une vieille guimbarde mais je sais pas trop si ça peut avoir un intérêt... (en collection hein, en perfs j'ai bien compris :o )

C'est un Apollo Domain 3000 (ou DN3000 à priori).

C'est rare ?
ça vaut quelque chose ?



Avatar de l’utilisateur
X-System
Messages : 6848
Inscription : ven. 12 janv. 2018 17:44

Avis sur vieille guimbarde

Message par X-System »

Salut,

je viens lire sur Wiki :

"In the late 1980s, Apollo introduced a revolutionary new pair of machines. The DN3000 and DN4000 used 68k processors, but were housed in IBM PC style cases of the time and had IBM-AT compatible ISA expansion slots and PC-compatible disk drives. These became the mainstay of the Apollo range in the mid to late 1980s. In principle, a user or third party could install a standard AT expansion card, but since this required the writing of a special device driver, in practice this was very rare. However, the size and design of the boxes made installing or replacing components very easy. A typical system could have between 2 MiB and 32 MiB of memory, a 76 MB, 150 MB or 330 MB (very occasionally 660 MB) hard disk, and 32-bit 68020 or 68030 processor running at 12 MHz to 33 MHz, depending on model. A half-height expansion bay could take either a 5¼-inch floppy disk drive or a QIC-type cartridge tape drive, capacity 30 MB, 45 MB, or 60 MB depending on cartridge. For printer access, the system came with a serial port as standard; a serial/parallel expansion card could provide a parallel printer port if this was required."

Image


Waouh! C'est énorme cet ordinateur :whistle:

Je ne connais pas cette marque.
PC1 = MW70-3S0 # 2x E5-2689 v4 # 32Go DDR4-2400 ECC reg # RTX 3080 Ti # 2x1To SSD
PC2 = Z170XP-SLI # i7-7700 # 32Go DDR4-2400 # 240Go NVMe # SAS9211-8i # 10 SSD/HDD SATA # LTO-5 SAS
PC3 = T460p # i7-6700HQ # 16Go DDR4-2133 # 940MX # 240Go SSD
Avatar de l’utilisateur
dsebire
Messages : 13182
Inscription : ven. 12 janv. 2018 17:44
Localisation : Loiret - entre la ville et les champs

Avis sur vieille guimbarde

Message par dsebire »

ah 68000 :love:
trop facile l'assembleur sur ces proco la.
intel c compliqué a coté
sylver52
Messages : 6003
Inscription : ven. 12 janv. 2018 17:44

Avis sur vieille guimbarde

Message par sylver52 »

C'est clair que l'asm la dessus c'est finger in the nose :P
Quentj
Messages : 204
Inscription : ven. 12 janv. 2018 17:44

Avis sur vieille guimbarde

Message par Quentj »

Bon ben j'ai voulu en lancer 2, et les deux ont merdé, à priori les disques sont morts donc l'aventure est finie (trouver le disque qui convient, trouver l'os proprio et un lecteur disquette compatible pour l'installer :whistle: )

Dommage c'était tellement beau, tout quasiment était proprio dessus :pt1cable:
Répondre