[SMP POOL] Topic principal <<-==->>FCGPU<<177 Blocks >>

Fungraphic
Messages : 757
Inscription : ven. 12 janv. 2018 17:44

[SMP POOL] Topic principal <<-==->>FCGPU<<177 Blocks >>

Message par Fungraphic »

Info bizarre sur wemineltc

5/25/13 - Pool Luck
As many of you have noticed the pool luck has been very bad the past 2-3 days and payouts therefore have suffered. We went from finding normally 80-90 blocks a day to finding 56 one day and in the 60's another. As your payouts are 100% based on the number of blocks we find, you will have most likely noticed lower payouts than normal.
While bad luck is possible we started to suspect other issues and worked with one of the litecoin devs to try to get to the bottom of why we werent finding the correct amount of blocks and see if it was just bad luck or other issues. We looked at many possible vectors of attack and diagnosed our connection to the litecoin network, latency of getting work, etc. We have identified a few possible vectors of attack and a few possible network issues and took steps to make changes to block these and improve the latter. Since making those changes we found 10 blocks in about an hour and luck drastically improved.
We will not be describing the possible attack vectors for obvious reasons as they are not well known or common and we cant confirm any of these vectors even were being exploited. What we do know is that things seem to be resolved and now that we are fiding the correct amount of blocks we expect payouts to go back to normal. We encourage all users to track blocks found on the block chain, every block can be traced back to the pool or person who mined it, we will be changing the pool mining address every 2 weeks starting tomorrow (this changes nothing for you, just makes it easier to check pool blocks found on the block explorer) to aid users in this process. Thank you for all of our dedicated miners who have weathered this issue and realize the value in our pool. We have worked non stop on this for the past 30 hours to work this out and will continue to monitor it closely.


5/27/13 - Crazy Night

For those of you not in our irc or on btc-e trollbox, etc its been a crazy night for litecoin and several pools. Things got a little weird on the litecoin network, pools got together with litecoin devs to try and work it out. The pools and devs are working together to get to the bottom of things and we will pass it along to you guys as we find out. In the meantime the pools are working together to sure up the network and keep data between pools consistent and clean. It's been a pretty crazy few days with ups and downs but we have been working around the clock on this and will continue to do so. As soon as the issue came up on the network tonight we got on it right away, LTC is ok, no need to panic, LTC devs are taking things seriously and are working just as hard. Consider sending a donation to the ltc devs to help support their great work and new development: https://forum.litecoin.net/index.php?to ... 2#msg27452 - With the linking of pools and changes we made we hope to block any more of these attacks.
Du coup tu vas faire quoi Poulpito?
Tu vas check la pool voir s'il y a aussi un prob chez nous?
Avatar de l’utilisateur
poulpito
Messages : 12402
Inscription : ven. 12 janv. 2018 17:44
Localisation : Grenoble

[SMP POOL] Topic principal <<-==->>FCGPU<<177 Blocks >>

Message par poulpito »

ah non nous on a aucun soucis
c'est lié a des attaques :) nous y'a rien tout va bien

mais ca veut dire que j'aurai surement d'ici quelques jours a mettre à jour les logiciels de litecoin ou pushpool (le serveur) pour corriger les failles sur lesquelles ils sont en train de bosser :)
Avatar de l’utilisateur
augur1
Messages : 13167
Inscription : ven. 12 janv. 2018 17:44
Localisation : où tout est neuf et tout est sauvage
Contact :

[SMP POOL] Topic principal <<-==->>FCGPU<<177 Blocks >>

Message par augur1 »

Peut être enlever l'adresse du pool en première page et le donner qu'en MP... histoire que les robots google nous oublie ?!

++
Avatar de l’utilisateur
poulpito
Messages : 12402
Inscription : ven. 12 janv. 2018 17:44
Localisation : Grenoble

[SMP POOL] Topic principal <<-==->>FCGPU<<177 Blocks >>

Message par poulpito »

je pense pas la on parle de pool énormes qui ont des soucis :)
pas de petits comme nous
givemeltc passe le même message

You may haave noticed extremly large blocks and round times over the past 24hours. This was due to multiple issues with finding blocks. This issue was affecting multiple pools for most of the day. We are still unsure of the cause but we have no reason to suspect it was due to issues on the litecoin network, will continue our investigations on this and give more information when we have it. So far things seem back to normal but we are keeping a firm eye on things.
If you are experiencing frequent disconnections contact us ASAP.

il faut qu'on passe notre large block on a pas le choix et après ca ira mieux :)
dans le doute je vais relancer le serveur pushpool :jap: (coupure de 1-2sec max)
edit : voila c'est fait :)
et j'ai rien d'anormal dans les logs :jap:
Jul77
Messages : 1779
Inscription : ven. 12 janv. 2018 17:44

[SMP POOL] Topic principal <<-==->>FCGPU<<177 Blocks >>

Message par Jul77 »

Je reviens sur une question de température, ma 6970 indique sous gpu-z 3 températures du GPU (GPU temp #1, GPU temp #2, GPU temp #3). Les températures sont de 69, 82 et 133°C.
Ça vous parle ? Est-ce inquiétant ? :o

Edit : Alors que sur ma 6950@6970 les temps sont de 70, 64, 61 (et vrm à 39°C) ...
Fungraphic
Messages : 757
Inscription : ven. 12 janv. 2018 17:44

[SMP POOL] Topic principal <<-==->>FCGPU<<177 Blocks >>

Message par Fungraphic »

Ouai j'ai vu mon Cgminer me mettre unknow user :D
micha30000
Messages : 9467
Inscription : ven. 12 janv. 2018 17:44

[SMP POOL] Topic principal <<-==->>FCGPU<<177 Blocks >>

Message par micha30000 »

133 trop chaud, c'est les VRM.
Jul77
Messages : 1779
Inscription : ven. 12 janv. 2018 17:44

[SMP POOL] Topic principal <<-==->>FCGPU<<177 Blocks >>

Message par Jul77 »

133 trop chaud, c'est les VRM.
VRM Temp m'indique 82°C sur cette carte.
Jul77
Messages : 1779
Inscription : ven. 12 janv. 2018 17:44

[SMP POOL] Topic principal <<-==->>FCGPU<<177 Blocks >>

Message par Jul77 »

Google m'indique qu'à priori ce seraient 3 températures relevées sur le die du gpu. Et du coup si l'écart de temp est très important il peut s'agir de la mauvaise application de la pate thermique :/ Possible étant donné qu'elle était avant wcoolée et qu'elle a retrouvé son rad d'origine :/
Je crois que je suis bon pour une petite application d'AS5
Fungraphic
Messages : 757
Inscription : ven. 12 janv. 2018 17:44

[SMP POOL] Topic principal <<-==->>FCGPU<<177 Blocks >>

Message par Fungraphic »

Bon maintenant que tout est ok pour mon Rig de 7950 il faut que je me fasse un beau support adapté pour tout ça :)
ToFist
Messages : 123
Inscription : ven. 12 janv. 2018 17:44

[SMP POOL] Topic principal <<-==->>FCGPU<<177 Blocks >>

Message par ToFist »

Je viens de recevoir les mêmes cartes que toi, mais difficile d'obtenir tes résultats, bravo !
Je suis plus entre 600 et 620KH/s mais sous Linux (je n'arrive pas à me faire à Windows pour ce genre de produit).
Par contre pour baisser la tension à 1.093 j'ai modifié le bios d'origine (une belle économie de 150W quand même pour 2 cartes, faut que je monte la 3ème pour tester).

Bon, je monte tout ça proprement, je laisse tourner dans le garage et je passe aux modifications de l'appli mobile :)
Fungraphic
Messages : 757
Inscription : ven. 12 janv. 2018 17:44

[SMP POOL] Topic principal <<-==->>FCGPU<<177 Blocks >>

Message par Fungraphic »

Je viens de recevoir les mêmes cartes que toi, mais difficile d'obtenir tes résultats, bravo !
Je suis plus entre 600 et 620KH/s mais sous Linux (je n'arrive pas à me faire à Windows pour ce genre de produit).
Par contre pour baisser la tension à 1.093 j'ai modifié le bios d'origine (une belle économie de 150W quand même pour 2 cartes, faut que je monte la 3ème pour tester).

Bon, je monte tout ça proprement, je laisse tourner dans le garage et je passe aux modifications de l'appli mobile :)
Cool entre 600 et 620 Khash c'est pas mal sous linux.
Regarde le gars ici avec le même matos il sort moins aussi sous linux
Fungraphic a écrit:
Tien je viens de refaire un tour sur le blog cryptobadger histoire de voir combien il sortait de ses cartes

Ben j'ai les même perfs que lui et avec un --gpu-memclock 1250 alors que lui met 1400

http://www.cryptobadger.com/2013/0 [...] g-windows/

Et pour info il fait moin bien sous linux

http://www.cryptobadger.com/2013/0 [...] rig-linux/

Si non avec quoi as tu modifier ton bios car je tenterai bien le truc ça m'éviterai d'avoir Trixx en route :)
ToFist
Messages : 123
Inscription : ven. 12 janv. 2018 17:44

[SMP POOL] Topic principal <<-==->>FCGPU<<177 Blocks >>

Message par ToFist »

Si non avec quoi as tu modifier ton bios car je tenterai bien le truc ça m'éviterai d'avoir Trixx en route :)
J'ai eu du mal à comprendre sachant que la tension n'est pas définie comme le max gpu freq et max memory freq.
Bref, sur le bios de ta carte à l'offset 47533, tu as les octets 00 E2 04 00 qui correspondent à la tension maximum du VRM, soit E2 04 => 04 E2 => 1250 => 1.250v.
J'ai donc tout simplement mis la valeur 00 45 04 00, soit 45 04 => 04 45 => 1093 => 1.093v

Atiflash n'aime pas le bios, il doit y avoir un control CRC... En forçant, ça flash et ça fonctionne.
Fungraphic
Messages : 757
Inscription : ven. 12 janv. 2018 17:44

[SMP POOL] Topic principal <<-==->>FCGPU<<177 Blocks >>

Message par Fungraphic »

Si non avec quoi as tu modifier ton bios car je tenterai bien le truc ça m'éviterai d'avoir Trixx en route :)
J'ai eu du mal à comprendre sachant que la tension n'est pas définie comme le max gpu freq et max memory freq.
Bref, sur le bios de ta carte à l'offset 47533, tu as les octets 00 E2 04 00 qui correspondent à la tension maximum du VRM, soit E2 04 => 04 E2 => 1250 => 1.250v.
J'ai donc tout simplement mis la valeur 00 45 04 00, soit 45 04 => 04 45 => 1093 => 1.093v

Atiflash n'aime pas le bios, il doit y avoir un control CRC... En forçant, ça flash et ça fonctionne.

Mouai du coup je suis pas chaud pour le faire lol
ToFist
Messages : 123
Inscription : ven. 12 janv. 2018 17:44

[SMP POOL] Topic principal <<-==->>FCGPU<<177 Blocks >>

Message par ToFist »

Apres je peux te filer le bios directement, on a les mêmes cartes. Surtout que tu ne risques rien avec les 2 bios que la carte embarque. J'ai flash mes 3 cartes et pas de pb ;)
Fungraphic
Messages : 757
Inscription : ven. 12 janv. 2018 17:44

[SMP POOL] Topic principal <<-==->>FCGPU<<177 Blocks >>

Message par Fungraphic »

Gling Gling Thx stefnice06

ToFist look tes mail
Avatar de l’utilisateur
biour
Messages : 24388
Inscription : ven. 12 janv. 2018 17:44

[SMP POOL] Topic principal <<-==->>FCGPU<<177 Blocks >>

Message par biour »

GG Stef
Image
streetmobo
Messages : 1340
Inscription : ven. 12 janv. 2018 17:44

[SMP POOL] Topic principal <<-==->>FCGPU<<177 Blocks >>

Message par streetmobo »

gg Stef
Avatar de l’utilisateur
augur1
Messages : 13167
Inscription : ven. 12 janv. 2018 17:44
Localisation : où tout est neuf et tout est sauvage
Contact :

[SMP POOL] Topic principal <<-==->>FCGPU<<177 Blocks >>

Message par augur1 »

Ouep GG :)

Diff: [#ff0000]602.34[/#ff0000] :fou:
Pool 43.88 MH/s (19.07 GH/s) :sol:
ToFist
Messages : 123
Inscription : ven. 12 janv. 2018 17:44

[SMP POOL] Topic principal <<-==->>FCGPU<<177 Blocks >>

Message par ToFist »

Attention l'offset indiqué est valable uniquement pour le bios 015.025.000.099.000000 de Sapphire.
Fungraphic
Messages : 757
Inscription : ven. 12 janv. 2018 17:44

[SMP POOL] Topic principal <<-==->>FCGPU<<177 Blocks >>

Message par Fungraphic »

Merci ToFist 5 minutes chrono pour flasher les 3 CG et Hop c'est repartis pour le minage :bounce:

Une tite vérif rapide dans CGminer sur les 3 cartes et tout nickel 1.093 v :jap:
Répondre